The System Error Codes are very broad. Each one can occur in one of many hundreds of locations in the system. Consequently the descriptions of these codes cannot be very specific. Use of these codes requires some amount of investigation and analysis. You need to note both the programmatic and the run-time context in which these errors occur. Because these codes are defined in WinError.h for anyone to use, sometimes the codes are returned by non-system software. Sometimes the code is returned by a function deep in the stack and far removed from your code that is handling the error.
The following list describes system error codes (errors 1000 to 1299). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.
Codes
ERROR_STACK_OVERFLOW
1001 (0x3E9) – Recursion too deep; the stack overflowed.
ERROR_INVALID_MESSAGE
1002 (0x3EA) – The window cannot act on the sent message.
ERROR_CAN_NOT_COMPLETE
1003 (0x3EB) – Cannot complete this function.
ERROR_INVALID_FLAGS
1004 (0x3EC) – Invalid flags.
ERROR_UNRECOGNIZED_VOLUME
1005 (0x3ED) – The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
ERROR_FILE_INVALID
1006 (0x3EE) – The volume for a file has been externally altered so that the opened file is no longer valid.
ERROR_FULLSCREEN_MODE
1007 (0x3EF) – The requested operation cannot be performed in full-screen mode.
ERROR_NO_TOKEN
1008 (0x3F0) – An attempt was made to reference a token that does not exist.
ERROR_BADDB
1009 (0x3F1) – The configuration registry database is corrupt.
ERROR_BADKEY
1010 (0x3F2) – The configuration registry key is invalid.
ERROR_CANTOPEN
1011 (0x3F3) – The configuration registry key could not be opened.
ERROR_CANTREAD
1012 (0x3F4) – The configuration registry key could not be read.
ERROR_CANTWRITE
1013 (0x3F5) – The configuration registry key could not be written.
ERROR_REGISTRY_RECOVERED
1014 (0x3F6) – One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
ERROR_REGISTRY_CORRUPT
1015 (0x3F7) – The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system’s memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
ERROR_REGISTRY_IO_FAILED
1016 (0x3F8) – An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system’s image of the registry.
ERROR_NOT_REGISTRY_FILE
1017 (0x3F9) – The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
ERROR_KEY_DELETED
1018 (0x3FA) – Illegal operation attempted on a registry key that has been marked for deletion.
ERROR_NO_LOG_SPACE
1019 (0x3FB) – System could not allocate the required space in a registry log.
ERROR_KEY_HAS_CHILDREN
1020 (0x3FC) – Cannot create a symbolic link in a registry key that already has subkeys or values.
ERROR_CHILD_MUST_BE_VOLATILE
1021 (0x3FD) – Cannot create a stable subkey under a volatile parent key.
ERROR_NOTIFY_ENUM_DIR
1022 (0x3FE) – A notify change request is being completed and the information is not being returned in the caller’s buffer. The caller now needs to enumerate the files to find the changes.
ERROR_DEPENDENT_SERVICES_RUNNING
1051 (0x41B) – A stop control has been sent to a service that other running services are dependent on.
ERROR_INVALID_SERVICE_CONTROL
1052 (0x41C) – The requested control is not valid for this service.
ERROR_SERVICE_REQUEST_TIMEOUT
1053 (0x41D) – The service did not respond to the start or control request in a timely fashion.
ERROR_SERVICE_NO_THREAD
1054 (0x41E) – A thread could not be created for the service.
ERROR_SERVICE_DATABASE_LOCKED
1055 (0x41F) – The service database is locked.
ERROR_SERVICE_ALREADY_RUNNING
1056 (0x420) – An instance of the service is already running.
ERROR_INVALID_SERVICE_ACCOUNT
1057 (0x421) – The account name is invalid or does not exist, or the password is invalid for the account name specified.
ERROR_SERVICE_DISABLED
1058 (0x422) – The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
ERROR_CIRCULAR_DEPENDENCY
1059 (0x423) – Circular service dependency was specified.
ERROR_SERVICE_DOES_NOT_EXIST
1060 (0x424) – The specified service does not exist as an installed service.
ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1061 (0x425) – The service cannot accept control messages at this time.
ERROR_SERVICE_NOT_ACTIVE
1062 (0x426) – The service has not been started.
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1063 (0x427) – The service process could not connect to the service controller.
ERROR_EXCEPTION_IN_SERVICE
1064 (0x428) – An exception occurred in the service when handling the control request.
ERROR_DATABASE_DOES_NOT_EXIST
1065 (0x429) – The database specified does not exist.
ERROR_SERVICE_SPECIFIC_ERROR
1066 (0x42A) – The service has returned a service-specific error code.
ERROR_PROCESS_ABORTED
1067 (0x42B) – The process terminated unexpectedly.
ERROR_SERVICE_DEPENDENCY_FAIL
1068 (0x42C) – The dependency service or group failed to start.
ERROR_SERVICE_LOGON_FAILED
1069 (0x42D) – The service did not start due to a logon failure.
ERROR_SERVICE_START_HANG
1070 (0x42E) – After starting, the service hung in a start-pending state.
ERROR_INVALID_SERVICE_LOCK
1071 (0x42F) – The specified service database lock is invalid.
ERROR_SERVICE_MARKED_FOR_DELETE
1072 (0x430) – The specified service has been marked for deletion.
ERROR_SERVICE_EXISTS
1073 (0x431) – The specified service already exists.
ERROR_ALREADY_RUNNING_LKG
1074 (0x432) – The system is currently running with the last-known-good configuration.
ERROR_SERVICE_DEPENDENCY_DELETED
1075 (0x433) – The dependency service does not exist or has been marked for deletion.
ERROR_BOOT_ALREADY_ACCEPTED
1076 (0x434) – The current boot has already been accepted for use as the last-known-good control set.
ERROR_SERVICE_NEVER_STARTED
1077 (0x435) – No attempts to start the service have been made since the last boot.
ERROR_DUPLICATE_SERVICE_NAME
1078 (0x436) – The name is already in use as either a service name or a service display name.
ERROR_DIFFERENT_SERVICE_ACCOUNT
1079 (0x437) – The account specified for this service is different from the account specified for other services running in the same process.
ERROR_CANNOT_DETECT_DRIVER_FAILURE
1080 (0x438) – Failure actions can only be set for Win32 services, not for drivers.
ERROR_CANNOT_DETECT_PROCESS_ABORT
1081 (0x439) – This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service’s process terminates unexpectedly.
ERROR_NO_RECOVERY_PROGRAM
1082 (0x43A) – No recovery program has been configured for this service.
ERROR_SERVICE_NOT_IN_EXE
1083 (0x43B) – The executable program that this service is configured to run in does not implement the service.
ERROR_NOT_SAFEBOOT_SERVICE
1084 (0x43C) – This service cannot be started in Safe Mode.
ERROR_END_OF_MEDIA
1100 (0x44C) – The physical end of the tape has been reached.
ERROR_FILEMARK_DETECTED
1101 (0x44D) – A tape access reached a filemark.
ERROR_BEGINNING_OF_MEDIA
1102 (0x44E) – The beginning of the tape or a partition was encountered.
ERROR_SETMARK_DETECTED
1103 (0x44F) – A tape access reached the end of a set of files.
ERROR_NO_DATA_DETECTED
1104 (0x450) – No more data is on the tape.
ERROR_PARTITION_FAILURE
1105 (0x451) – Tape could not be partitioned.
ERROR_INVALID_BLOCK_LENGTH
1106 (0x452) – When accessing a new tape of a multivolume partition, the current block size is incorrect.
ERROR_DEVICE_NOT_PARTITIONED
1107 (0x453) – Tape partition information could not be found when loading a tape.
ERROR_UNABLE_TO_LOCK_MEDIA
1108 (0x454) – Unable to lock the media eject mechanism.
ERROR_UNABLE_TO_UNLOAD_MEDIA
1109 (0x455) – Unable to unload the media.
ERROR_MEDIA_CHANGED
1110 (0x456) – The media in the drive may have changed.
ERROR_BUS_RESET
1111 (0x457) – The I/O bus was reset.
ERROR_NO_MEDIA_IN_DRIVE
1112 (0x458) – No media in drive.
ERROR_NO_UNICODE_TRANSLATION
1113 (0x459) – No mapping for the Unicode character exists in the target multi-byte code page.
ERROR_DLL_INIT_FAILED
1114 (0x45A) – A dynamic link library (DLL) initialization routine failed.
ERROR_SHUTDOWN_IN_PROGRESS
1115 (0x45B) – A system shutdown is in progress.
ERROR_NO_SHUTDOWN_IN_PROGRESS
1116 (0x45C) – Unable to abort the system shutdown because no shutdown was in progress.
ERROR_IO_DEVICE
1117 (0x45D) – The request could not be performed because of an I/O device error.
ERROR_SERIAL_NO_DEVICE
1118 (0x45E) – No serial device was successfully initialized. The serial driver will unload.
ERROR_IRQ_BUSY
1119 (0x45F) – Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
ERROR_MORE_WRITES
1120 (0x460) – A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
ERROR_COUNTER_TIMEOUT
1121 (0x461) – A serial I/O operation completed because the timeout period expired. The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
ERROR_FLOPPY_ID_MARK_NOT_FOUND
1122 (0x462) – No ID address mark was found on the floppy disk.
ERROR_FLOPPY_WRONG_CYLINDER
1123 (0x463) – Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
ERROR_FLOPPY_UNKNOWN_ERROR
1124 (0x464) – The floppy disk controller reported an error that is not recognized by the floppy disk driver.
ERROR_FLOPPY_BAD_REGISTERS
1125 (0x465) – The floppy disk controller returned inconsistent results in its registers.
ERROR_DISK_RECALIBRATE_FAILED
1126 (0x466) – While accessing the hard disk, a recalibrate operation failed, even after retries.
ERROR_DISK_OPERATION_FAILED
1127 (0x467) – While accessing the hard disk, a disk operation failed even after retries.
ERROR_DISK_RESET_FAILED
1128 (0x468) – While accessing the hard disk, a disk controller reset was needed, but even that failed.
ERROR_EOM_OVERFLOW
1129 (0x469) – Physical end of tape encountered.
ERROR_NOT_ENOUGH_SERVER_MEMORY
1130 (0x46A) – Not enough server storage is available to process this command.
ERROR_POSSIBLE_DEADLOCK
1131 (0x46B) – A potential deadlock condition has been detected.
ERROR_MAPPED_ALIGNMENT
1132 (0x46C) – The base address or the file offset specified does not have the proper alignment.
ERROR_SET_POWER_STATE_VETOED
1140 (0x474) – An attempt to change the system power state was vetoed by another application or driver.
ERROR_SET_POWER_STATE_FAILED
1141 (0x475) – The system BIOS failed an attempt to change the system power state.
ERROR_TOO_MANY_LINKS
1142 (0x476) – An attempt was made to create more links on a file than the file system supports.
ERROR_OLD_WIN_VERSION
1150 (0x47E) – The specified program requires a newer version of Windows.
ERROR_APP_WRONG_OS
1151 (0x47F) – The specified program is not a Windows or MS-DOS program.
ERROR_SINGLE_INSTANCE_APP
1152 (0x480) – Cannot start more than one instance of the specified program.
ERROR_RMODE_APP
1153 (0x481) – The specified program was written for an earlier version of Windows.
ERROR_INVALID_DLL
1154 (0x482) – One of the library files needed to run this application is damaged.
ERROR_NO_ASSOCIATION
1155 (0x483) – No application is associated with the specified file for this operation.
ERROR_DDE_FAIL
1156 (0x484) – An error occurred in sending the command to the application.
ERROR_DLL_NOT_FOUND
1157 (0x485) – One of the library files needed to run this application cannot be found.
ERROR_NO_MORE_USER_HANDLES
1158 (0x486) – The current process has used all of its system allowance of handles for Window Manager objects.
ERROR_MESSAGE_SYNC_ONLY
1159 (0x487) – The message can be used only with synchronous operations.
ERROR_SOURCE_ELEMENT_EMPTY
1160 (0x488) – The indicated source element has no media.
ERROR_DESTINATION_ELEMENT_FULL
1161 (0x489) – The indicated destination element already contains media.
ERROR_ILLEGAL_ELEMENT_ADDRESS
1162 (0x48A) – The indicated element does not exist.
ERROR_MAGAZINE_NOT_PRESENT
1163 (0x48B) – The indicated element is part of a magazine that is not present.
ERROR_DEVICE_REINITIALIZATION_NEEDED
1164 (0x48C) – The indicated device requires reinitialization due to hardware errors.
ERROR_DEVICE_REQUIRES_CLEANING
1165 (0x48D) – The device has indicated that cleaning is required before further operations are attempted.
ERROR_DEVICE_DOOR_OPEN
1166 (0x48E) – The device has indicated that its door is open.
ERROR_DEVICE_NOT_CONNECTED
1167 (0x48F) – The device is not connected.
ERROR_NOT_FOUND
1168 (0x490) – Element not found.
ERROR_NO_MATCH
1169 (0x491) – There was no match for the specified key in the index.
ERROR_SET_NOT_FOUND
1170 (0x492) – The property set specified does not exist on the object.
ERROR_POINT_NOT_FOUND
1171 (0x493) – The point passed to GetMouseMovePoints is not in the buffer.
ERROR_NO_TRACKING_SERVICE
1172 (0x494) – The tracking (workstation) service is not running.
ERROR_NO_VOLUME_ID
1173 (0x495) – The Volume ID could not be found.
ERROR_UNABLE_TO_REMOVE_REPLACED
1175 (0x497) – Unable to remove the file to be replaced.
ERROR_UNABLE_TO_MOVE_REPLACEMENT
1176 (0x498) – Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
1177 (0x499) – Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
ERROR_JOURNAL_DELETE_IN_PROGRESS
1178 (0x49A) – The volume change journal is being deleted.
ERROR_JOURNAL_NOT_ACTIVE
1179 (0x49B) – The volume change journal is not active.
ERROR_POTENTIAL_FILE_FOUND
1180 (0x49C) – A file was found, but it may not be the correct file.
ERROR_JOURNAL_ENTRY_DELETED
1181 (0x49D) – The journal entry has been deleted from the journal.
ERROR_SHUTDOWN_IS_SCHEDULED
1190 (0x4A6) – A system shutdown has already been scheduled.
ERROR_SHUTDOWN_USERS_LOGGED_ON
1191 (0x4A7) – The system shutdown cannot be initiated because there are other users logged on to the computer.
ERROR_BAD_DEVICE
1200 (0x4B0) – The specified device name is invalid.
ERROR_CONNECTION_UNAVAIL
1201 (0x4B1) – The device is not currently connected but it is a remembered connection.
ERROR_DEVICE_ALREADY_REMEMBERED
1202 (0x4B2) – The local device name has a remembered connection to another network resource.
ERROR_NO_NET_OR_BAD_PATH
1203 (0x4B3) – The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.
ERROR_BAD_PROVIDER
1204 (0x4B4) – The specified network provider name is invalid.
ERROR_CANNOT_OPEN_PROFILE
1205 (0x4B5) – Unable to open the network connection profile.
ERROR_BAD_PROFILE
1206 (0x4B6) – The network connection profile is corrupted.
ERROR_NOT_CONTAINER
1207 (0x4B7) – Cannot enumerate a noncontainer.
ERROR_EXTENDED_ERROR
1208 (0x4B8) – An extended error has occurred.
ERROR_INVALID_GROUPNAME
1209 (0x4B9) – The format of the specified group name is invalid.
ERROR_INVALID_COMPUTERNAME
1210 (0x4BA) – The format of the specified computer name is invalid.
ERROR_INVALID_EVENTNAME
1211 (0x4BB) – The format of the specified event name is invalid.
ERROR_INVALID_DOMAINNAME
1212 (0x4BC) – The format of the specified domain name is invalid.
ERROR_INVALID_SERVICENAME
1213 (0x4BD) – The format of the specified service name is invalid.
ERROR_INVALID_NETNAME
1214 (0x4BE) – The format of the specified network name is invalid.
ERROR_INVALID_SHARENAME
1215 (0x4BF) – The format of the specified share name is invalid.
ERROR_INVALID_PASSWORDNAME
1216 (0x4C0) – The format of the specified password is invalid.
ERROR_INVALID_MESSAGENAME
1217 (0x4C1) – The format of the specified message name is invalid.
ERROR_INVALID_MESSAGEDEST
1218 (0x4C2) – The format of the specified message destination is invalid.
ERROR_SESSION_CREDENTIAL_CONFLICT
1219 (0x4C3) – Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1220 (0x4C4) – An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
ERROR_DUP_DOMAINNAME
1221 (0x4C5) – The workgroup or domain name is already in use by another computer on the network.
ERROR_NO_NETWORK
1222 (0x4C6) – The network is not present or not started.
ERROR_CANCELLED
1223 (0x4C7) – The operation was canceled by the user.
ERROR_USER_MAPPED_FILE
1224 (0x4C8) – The requested operation cannot be performed on a file with a user-mapped section open.
ERROR_CONNECTION_REFUSED
1225 (0x4C9) – The remote computer refused the network connection.
ERROR_GRACEFUL_DISCONNECT
1226 (0x4CA) – The network connection was gracefully closed.
ERROR_ADDRESS_ALREADY_ASSOCIATED
1227 (0x4CB) – The network transport endpoint already has an address associated with it.
ERROR_ADDRESS_NOT_ASSOCIATED
1228 (0x4CC) – An address has not yet been associated with the network endpoint.
ERROR_CONNECTION_INVALID
1229 (0x4CD) – An operation was attempted on a nonexistent network connection.
ERROR_CONNECTION_ACTIVE
1230 (0x4CE) – An invalid operation was attempted on an active network connection.
ERROR_NETWORK_UNREACHABLE
1231 (0x4CF) – The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_HOST_UNREACHABLE
1232 (0x4D0) – The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_PROTOCOL_UNREACHABLE
1233 (0x4D1) – The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_PORT_UNREACHABLE
1234 (0x4D2) – No service is operating at the destination network endpoint on the remote system.
ERROR_REQUEST_ABORTED
1235 (0x4D3) – The request was aborted.
ERROR_CONNECTION_ABORTED
1236 (0x4D4) – The network connection was aborted by the local system.
ERROR_RETRY
1237 (0x4D5) – The operation could not be completed. A retry should be performed.
ERROR_CONNECTION_COUNT_LIMIT
1238 (0x4D6) – A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
ERROR_LOGIN_TIME_RESTRICTION
1239 (0x4D7) – Attempting to log in during an unauthorized time of day for this account.
ERROR_LOGIN_WKSTA_RESTRICTION
1240 (0x4D8) – The account is not authorized to log in from this station.
ERROR_INCORRECT_ADDRESS
1241 (0x4D9) – The network address could not be used for the operation requested.
ERROR_ALREADY_REGISTERED
1242 (0x4DA) – The service is already registered.
ERROR_SERVICE_NOT_FOUND
1243 (0x4DB) – The specified service does not exist.
ERROR_NOT_AUTHENTICATED
1244 (0x4DC) – The operation being requested was not performed because the user has not been authenticated.
ERROR_NOT_LOGGED_ON
1245 (0x4DD) – The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
ERROR_CONTINUE
1246 (0x4DE) – Continue with work in progress.
ERROR_ALREADY_INITIALIZED
1247 (0x4DF) – An attempt was made to perform an initialization operation when initialization has already been completed.
ERROR_NO_MORE_DEVICES
1248 (0x4E0) – No more local devices.
ERROR_NO_SUCH_SITE
1249 (0x4E1) – The specified site does not exist.
ERROR_DOMAIN_CONTROLLER_EXISTS
1250 (0x4E2) – A domain controller with the specified name already exists.
ERROR_ONLY_IF_CONNECTED
1251 (0x4E3) – This operation is supported only when you are connected to the server.
ERROR_OVERRIDE_NOCHANGES
1252 (0x4E4) – The group policy framework should call the extension even if there are no changes.
ERROR_BAD_USER_PROFILE
1253 (0x4E5) – The specified user does not have a valid profile.
ERROR_NOT_SUPPORTED_ON_SBS
1254 (0x4E6) – This operation is not supported on a computer running Windows Server 2003 for Small Business Server.
ERROR_SERVER_SHUTDOWN_IN_PROGRESS
1255 (0x4E7) – The server machine is shutting down.
ERROR_HOST_DOWN
1256 (0x4E8) – The remote system is not available. For information about network troubleshooting, see Windows Help.
ERROR_NON_ACCOUNT_SID
1257 (0x4E9) – The security identifier provided is not from an account domain.
ERROR_NON_DOMAIN_SID
1258 (0x4EA) – The security identifier provided does not have a domain component.
ERROR_APPHELP_BLOCK
1259 (0x4EB) – AppHelp dialog canceled thus preventing the application from starting.
ERROR_ACCESS_DISABLED_BY_POLICY
1260 (0x4EC) – This program is blocked by group policy. For more information, contact your system administrator.
ERROR_REG_NAT_CONSUMPTION
1261 (0x4ED) – A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
ERROR_CSCSHARE_OFFLINE
1262 (0x4EE) – The share is currently offline or does not exist.
ERROR_PKINIT_FAILURE
1263 (0x4EF) – The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
ERROR_SMARTCARD_SUBSYSTEM_FAILURE
1264 (0x4F0) – The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
ERROR_DOWNGRADE_DETECTED
1265 (0x4F1) – The system cannot contact a domain controller to service the authentication request. Please try again later.
ERROR_MACHINE_LOCKED
1271 (0x4F7) – The machine is locked and cannot be shut down without the force option.
ERROR_CALLBACK_SUPPLIED_INVALID_DATA
1273 (0x4F9) – An application-defined callback gave invalid data when called.
ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
1274 (0x4FA) – The group policy framework should call the extension in the synchronous foreground policy refresh.
ERROR_DRIVER_BLOCKED
1275 (0x4FB) – This driver has been blocked from loading.
ERROR_INVALID_IMPORT_OF_NON_DLL
1276 (0x4FC) – A dynamic link library (DLL) referenced a module that was neither a DLL nor the process’s executable image.
ERROR_ACCESS_DISABLED_WEBBLADE
1277 (0x4FD) – Windows cannot open this program since it has been disabled.
ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
1278 (0x4FE) – Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
ERROR_RECOVERY_FAILURE
1279 (0x4FF) – A transaction recover failed.
ERROR_ALREADY_FIBER
1280 (0x500) – The current thread has already been converted to a fiber.
ERROR_ALREADY_THREAD
1281 (0x501) – The current thread has already been converted from a fiber.
ERROR_STACK_BUFFER_OVERRUN
1282 (0x502) – The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
ERROR_PARAMETER_QUOTA_EXCEEDED
1283 (0x503) – Data present in one of the parameters is more than the function can operate on.
ERROR_DEBUGGER_INACTIVE
1284 (0x504) – An attempt to do an operation on a debug object failed because the object is in the process of being deleted.
ERROR_DELAY_LOAD_FAILED
1285 (0x505) – An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
ERROR_VDM_DISALLOWED
1286 (0x506) – %1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
ERROR_UNIDENTIFIED_ERROR
1287 (0x507) – Insufficient information exists to identify the cause of failure.
ERROR_INVALID_CRUNTIME_PARAMETER
1288 (0x508) – The parameter passed to a C runtime function is incorrect.
ERROR_BEYOND_VDL
1289 (0x509) – The operation occurred beyond the valid data length of the file.
ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
1290 (0x50A) – The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service. On Windows Server 2003 and Windows XP, an unrestricted service cannot coexist in the same process with other services. The service with the unrestricted service SID type must be moved to an owned process in order to start this service.
ERROR_DRIVER_PROCESS_TERMINATED
1291 (0x50B) – The process hosting the driver for this device has been terminated.
ERROR_IMPLEMENTATION_LIMIT
1292 (0x50C) – An operation attempted to exceed an implementation-defined limit.
ERROR_PROCESS_IS_PROTECTED
1293 (0x50D) – Either the target process, or the target thread’s containing process, is a protected process.
ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
1294 (0x50E) – The service notification client is lagging too far behind the current state of services in the machine.
ERROR_DISK_QUOTA_EXCEEDED
1295 (0x50F) – The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.
ERROR_CONTENT_BLOCKED
1296 (0x510) – The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.
ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
1297 (0x511) – A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.
ERROR_APP_HANG
1298 (0x512) – A thread involved in this operation appears to be unresponsive.
ERROR_INVALID_LABEL
1299 (0x513) – Indicates a particular Security ID may not be assigned as the label of an object.